Elegoo PLA Plus Filament 1.75mm
- Brand New PLA Plus Filaments
- Tough & High Impact Strength
- Glossy Surface & Good Layer Adhesion
- Less-tangle & Neatly Wound
- Dimensional Accuracy & Consistency
- No Clogging & No Bubbles
₹899 – ₹1,049
MRP is inclusive of all taxes.
Buy NowDescription
Better Printing Quality
Made from premium eco-friendly materials, Elegoo PLA Plus Filament minimizes warpage and shrinkage for precise prints. It offers excellent printability, superior strength, and flexibility, ensuring a consistent and odorless printing experience.
Accurate & Consistent Dimension
Strict tolerances and perfect dimensional accuracy ensure smooth and consistent feeding and optimal flow through the extruder for these 1.75mm PLA+ filaments with a dimensional accuracy of +/- 0.02mm.
Tangle-free & Neat Spool
Full mechanical winding with secondary sub-winding and strict manual inspection ensures that the lines are neatly arranged on the reels, which effectively reduces the occurrence of crossed turns and tangles and avoids possible snap and line breakage. With an eco-friendly design in mind, our PLA+ adopts the cardboard spool, which degrades faster than plastic spools and is more eco-friendly. In addition, there are three holes for monitoring the remaining filaments and timely replacement.
Widely Compatible
Universally compatible with most common 1.75mm FDM 3D printers on the market due to its high performance and +/- 0.02mm dimensional accuracy.
Elegoo PLA Plus Filament Specification
Density :- 1.25g/cm³
Melt index :- 10(190°C/2.16kg)g/10min
Tensile strength（X-Y) :- ≥ 60 MPa
Elongation at break（X-Y) :- 23%
Bending strength :- 76MPa
Bending modulus :- 1911MPa
Charpy impact strength:- 9 kj/m²
Thermal deformation temp :- 53°C(0.45MPa)
Fan :- 100%
Line length :- (175mm) 330-335m
Rockwell hardness :- 88
Print layer thickness :- 0.2mm
Recommended extrusion/nozzle temp :- 205~230°C(recommended 215°C)
Recommended heated bed temp :- 50-65°C
Printing speed :- 30-70mm/s
Recommendation platform :- PEI/Glass/Fiberglass Board/PEI+PVP glue stick or textured paper
Key features :- Modified based on PLA. Compared with PLA, it has a lower melt index, higher impact strength, stronger tensile toughness, and is less prone to stringing and cracking.
You must be logged in to post a review.
Downloads
No additional downloads available.
Product Information
Manufactured by
Hongkong Elegoo Technology Limited
Flat/Rm 313 3/F Wellborne Commercial Centre 8 Java Road North Point Hk
Marketed by
WOL3D India Limited
19/B(1), 2Nd Floor, Hakoba Compound , Kalachowky, Mumbai - 400033
Country of Origin
Hong Kong
Reviews
There are no reviews yet.