Elegoo Water Washable Resin V2.0 (1Kg)

Water-washable Resin V2.0

ELEGOO Water Washable photopolymer resin is a significant breakthrough and no more hassle for cleaning resin model from now on!
After your model is complete, put them in a container full of water and shake it or wash it under the faucet if you prefer. Save your time and save your money.

• Easy Cleaning & Post-Processing: Rinse away the hassle of post-processing. Simply rinse your prints under water, eliminating the need for harsh chemicals and complicated procedures. Enjoy an odor-free and simplified workflow that saves you time and effort.
• Superior Detail Reproduction: The water-washable resin 2.0 with low viscosity exhibits excellent fluidity, enabling it to effortlessly fill even the tiniest crevices. From the finest textures to the most intricate structures, every minute detail of your design is faithfully reproduced with unmatched fidelity.
• High Precision & Low Shrinkage: With its advanced formulation and low shrinkage, the water-washable resin 2.0 delivers high-precision printed models with smooth surface finish and accurate dimensions, preventing any distortion or loss of fine features.
• Fast Curing & Efficient Production: The water-washable resin 2.0 combines speed and quality seamlessly. With its fast curing, you can achieve exceptional prints in a fraction of the time, allowing you to effortlessly meet high-volume demands with maximized efficiency.
• High Compatibility, Tailored to Your Needs: The water-washable resin 2.0 is compatible with a wide range of 3D printers, ensuring it can seamlessly adapt to your existing equipment. Whether you’re a hobbyist, professional, or part of a production team, the resin is designed to meet your specific needs.

Usage condition :
1) Shake up the bottle before use and avoid direct sunlight and dusty environment
2) Do not drink it and keep it out of the reach of children
3) Please wear a mask and gloves when using to avoid direct skin contact and maintain indoor ventilation
4) If you got skin contact, please wash away with waters immediately, and if you feel discomfort, please see a doctor ASAP.
5) Once the model is complete, please wash it with water for 30 seconds at least and dispose of the waster properly
6)If you don’t use the resin, please do not leave them in the resin tank over 48 hours or put them back to its original bottle and seal it.

Material Properties :
Curing wave-length: 405 nm
Hardness: 79.0 D
Shrinkage: 7.1 %
Viscosity (25°): 552.0 mpa.s
Liquid density: 1.100 g/cm³
Solid density: 1.184 g/cm³
Tensile strength: 23.4 Mpa
Elongation at break: 14.2 %
Shelf life: 1 year(see production date on the label)