“”

ELEGOO Neptune 4 Pro FDM 3D Printer

9 Reviews Write a review
Product codeNeptune 4 Pro
  • Forming size: 225*225*265mm(mm³)
  • PEI Magnetic Platform area size: 235*235mm
  • MAX. hotbed temperature: 110° Celsius
  • MAX. nozzle temperature: 300° Celsius

 

Original price was: ₹32,999.Current price is: ₹28,000.

-15%

MRP is inclusive of all taxes.

Product is out of stock

Description

ELEGOO Neptune 4 Pro is a great addition to the Elegoo family. The FDM printer is equipped with a high-performance, high-speed mainboard, reaches an incredible top speed of 500 mm/s, and is compatible with Klipper! The Elegoo Neptune 4 Pro is a high-precision 3D printer designed for both beginners and experts, offering versatility and ease of use. With a sleek design, sturdy frame, and a spacious build volume, it can print both detailed miniatures and large prototypes . Ideal for creative projects and functional designs, it ensures reliability and quality with every print.

 

  • 【Pre-installed Klipper Firmware】The Neptune 4 Pro 3D printer is designed to be fast and efficient. It features a quiet Klipper motherboard and ARM 64-bit 1.5G main frequency quad-core processor for sufficient processing power, allowing it to print at a amazing speed of up to 500mm/s  (recommended 250mm/s), and supports advanced functions like input shaping and pressure advance to achieve accurate and smooth models.
  • 【Dual-Gear Direct Drive Extruder】The dual-gear direct drive extruder with a 5.2:1 reduction ratio for smooth and consistent extrusion, combined with the copper-titanium bi-metal throat pipe and unique air duct design, improve heat dissipation and reduce nozzle clogging.
  • 【300°C High-temp Nozzle】With a high-temperature nozzle reaching 300°C, the printer can handle a wide range of filaments, including PLA, PETG, ABS, TPU, and high-temperature filaments like nylon. The extended hot end design ensures consistent heating and faster melting and extrusion, resulting in faster printing speed.
  • 【Intelligent Segmented Heatbed】With 100W+150W power output, the slicing software automatically recognizes the size of the model during slicing and activates the peripheral heating zone if the model size exceeds the center heating zone (120mmx120mm). The two partitions can also be turned on and off manually for more precise temperature control. Additionally, the surface of the PEI magnetic platform is marked for guidance.
  • 【Auto Bed Leveling + Auxiliary Leveling】With 121 (11×11) points auto bed leveling, you can achieve consistent and reliable prints every time without the need for manual bed leveling. Additionally, the auxiliary leveling by hand-twist knobs allows for further fine-tuning of the print bed’s level for improved print quality.
  • 【Efficient Heat Dissipation】ELEGOO Neptune 4 Pro also features 2 thickened double-sided 4015 ball bearing cooling fans and 4×4020 ball bearing blower fans behind the print head for omnidirectional rapid cooling the newly printed layers to prevent warping and improve overall print quality even at a fast printing speed.

Speed Up Printing with Klipper

With the Klipper motherboard and ARM 64-bit 1.5G main frequency quad-core processor to process and execute commands faster, Neptune 4 Pro can print at up to 500mm/s, allowing you to complete your print projects quickly and efficiently. With our pre-installed Klipper firmware, you can start printing right away without the hassle of firmware installation.

In addition, it supports input shaping, which helps eliminate artifacts and resonances on the model surface, and pressure advance, which helps predict nozzle pressure for more accurate and consistent extrusion and less filament ooze and blobbing.

Powerful Extrusion Mechanism

The printer’s dual-gear direct drive extruder is another key feature that ensures smooth and consistent extrusion, weighing only 75% of the weight of the Neptune 3 Pro. The 5.2:1 reduction ratio and dual-gear design ensure a firm grip on the filament and prevent the flexible filament from slipping and grinding. The copper-titanium bi-metal throat pipe has a unique air duct design for faster heat dissipation of the throat pipe and less nozzle clogging.

The 300°C high-temp nozzle with an extended hotend design to fully melt the filament, and you can explore a wider range of materials, such as PLA, PETG, ABS, TPU, and high-temp filaments like nylon.

Separate Segmented Heatbed

ELEGOO Neptune 4 Pro features an intelligent segmented heatbed for added efficiency and energy-saving, and a hot bed overheat protection switch to prevent thermal runaway causing hot bed damage or fire. The heatbed can be set to 100W to heat only the center area (120mmx120mm), making it ideal for smaller models. For larger models, the heatbed can be set to 250W, heating the entire surface area. The two partitions can also be manually controlled for flexible temperature adjustments.

PEI magnetic platform with a special coating and spring steel sheet for good adhesion and anti-warping, just gently bend the print steel plate to release or pop off the prints.

Efficient Cooling System

To ensure rapid and omnidirectional cooling of newly deposited models, the Neptune 4 Pro has two thickened 4015 ball bearing cooling fans on each side of the print head and four 4020 ball bearing blower fans behind it. This cooling system allows the hot filament to bond quickly for better overhang and bridge results even at a fast printing speed, preventing issues like warping or deformation.

More Practical Features

The printer can resume printing after an unexpected power failure, thanks to its power loss recovery function. With a filament detection sensor, when the filament runs out or breaks, the printer will pause and alarm.

Support LAN networking printing, once connected, you can use the WEB terminal to remote control and monitor your printer on the same network.

The XY-axis belt tensioner is easy to adjust with a hand-twist knob, and the widened Y-axis profile ensures a stable printing platform.

The 4.3-inch removable capacitive screen supports 8 languages and can be used handheld or fixed on the machine base. It features a printed model preview and a pause printing function to monitor printing progress and make adjustments as needed.

The gantry’s LED light bar and nozzle LED light can be operated via the screen’s button for conveniently observing model printing in a dark environment.

  • Product model: Elegoo Neptune 4 Pro
  • Frame material: CNC machined aluminium extrusion
  • Modeling technology: FDM(Fused Deposition Modeling)
  • Rated voltage: 100-240V 50/60Hz
  • Printing Speed: 30-500mm/s (Suggested Speed: 250mm/s)
  • Forming size: 225*225*265mm(mm³)
  • PEI Magnetic Platform area size: 235*235mm
  • Equipment dimensions: 475*445*515mm
  • MAX. nozzle temperature: 300° Celsius
  • MAX. hotbed temperature: 110° Celsius
  • Connection Method: USB, LAN
  • File transfer: USB drive off-line printing
  • File format: .stl, .obj, .amf
  • Filament compatibility: PLA, ABS, TPU, PETG, Wood, Marble, Nylon, etc
  • UI language: English, French, German, Russian, Italian, Spanish, Japanese, Chinese
  • Resume printing: Yes
  • Filament detection: Yes
  • Net weight: 8.9KG

Additional information

Brand

Elegoo

Reviews

    WOL3D
    October 9, 2024
    Very solid printer and makes great prints! Fast!
    WOL3D
    October 9, 2024
    I have had this printer for almost a month and so far it has done pretty well. Very pleased with the quality for the price.
    WOL3D
    October 9, 2024
    Works good a very nice product would recommend it
    WOL3D
    October 9, 2024
    Great out of the box . A fun new hobby I can spend hours with it making stuff
    WOL3D
    October 9, 2024
    Only have had this printer for a week and have been using it non stop!
    WOL3D
    October 9, 2024
    He loves it!!! Got it out of the box and started printing!!! That easy!
    WOL3D
    October 9, 2024
    Great machine prints so clean and fast set up was quick and easy
    WOL3D
    October 9, 2024
    Received the printer today and set it up to print the budha which came out well except
    WOL3D
    October 9, 2024
    The 3D Neptune 4 Pro is amazing! Thank you for the amazing customer service Elegoo.
Add a review

Downloads

No additional downloads available.

Product Information

Manufactured by

Hongkong Elegoo Technology Limited

Flat/Rm 313 3/F Wellborne Commercial Centre 8 Java Road North Point Hk

Marketed by

WOL3D India Limited

19/B(1), 2Nd Floor, Hakoba Compound , Kalachowky, Mumbai - 400033

Country of Origin

Hong Kong

Back to Top

Search For Products

Product has been added to your cart

Exclusive Maintenance & Warranty Packages

WOL3DCare+

WOL3DCare+ offers complete protection for your 3D printers with priority support, damage coverage, and repairs. Keep your printing operations running smoothly year-round.

₹3,540*

Installation And Training

WOL3D offers 3D printer installation, training, and support with travel expenses covered by the client; services are governed by Indian law and include a 7-day post-installation warranty.

₹5,900

Download Our Brochure!