Description
Bambu Lab PLA Glow
Unique Glow in Low Light Conditions
Bambu PLA Glow incorporates a distinct additive: luminous powder, which imparts a special property to printed objects, causing them to emit a captivating glow in the dark.
Accessory Compatibility
* A hardened nozzle is required when printing regularly.
* It is not recommended to print Bambu PLA Glow and other glow-in-the-dark PLA filaments with AMS Lite. These filaments, being hard and rough, may cause feeding failures due to substantial feeding resistance.
PLA Glow Hex Code Table
RFID for Intelligent Printing
All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).
Load and print! No more tedious setting steps.
Downloads
📄 Technical Data Sheet
Explore detailed specifications and technical properties of the Bambu Lab PLA Galaxy Filament.
👉 https://store.bblcdn.com/cd34cf072d14484bbf027290d16abe9b.pdf
📄 Material Safety Data Sheet
Access important safety guidelines and handling instructions for safe use of the filament.
👉 https://store.bblcdn.com/9ddf5d6d9cc64dab9b0d611fea8b04c8.pdf
📄 RoHS Compliance
Verify the filament’s RoHS compliance and environmental safety details.
👉 https://store.bblcdn.com/2c7b9c30a9014c65bb4aeacd9c70e6af.pdf
Printing Tips
• Drying conditions: 55℃ for 8 hrs. Store in a dry environment after use. Dry before use if the material absorbs moisture. For more details please refer to: Filament drying instructions on WIKI.
• Printing with a 0.2 mm nozzle is not recommended; instead, it is advised to use a 0.4 mm nozzle for optimal results.
• The model’s luminous intensity diminishes over time, but exposure to ultraviolet or sunlight for a brief period (approximately 2 hours) can rejuvenate its glow. However, prolonged or frequent irradiation may expedite PLA aging.
• Not suitable for AMS lite: Utilizing AMS lite may result in high feed resistance and an increased risk of feed failure. Consider alternative methods such as pre-use drying for better outcomes.
What's in the Box
Reviews
There are no reviews yet.